- Manuals
- Brands
- Fireplace Manuals
- Stove
- K1266
- Manual
Hide thumbs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Table Of Contents 19
-
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Table of Contents
-
Fire Plus System
-
Stove - Cross Section Drawing
-
Heating Capacity in Kw Categories
-
Installation Guide
-
Suitable Fuels
-
-
Reducing Emission
-
Lighting the Fire for the First Time
-
-
Further Use
-
Troubleshooting
-
Special Notes
Advertisem*nt
Quick Links
Download this manual
Dear Customer,
Thank you for your decision to buy a FIREPLACE hearth.
The crackling, visible flames give you the sense of comfort and security.
The combination of hot-air heating and heat radiation provides a pleasant and
healthy climate in the room.
The combined use of modern heating technology, excellent quality of materi-
als and effective heat exchange, results in high efficiency and economical
operation. Different fuels such as dry wood, brown coal briquette, or wooden
briquette can be burned without unwanted emissions if used as directed..
Furthermore, the fire flaming in your FIREPLACE hearth creates an intimate
atmosphere for your family and friends.
Use of excellent raw materials assures you will have a long-lasting pleasant
experience.
But it is important that you contribute to the care of your new FIREPLACE
hearth by carefully reading this manual and following the instructions.
In spite of the finest quality materials and workmanship, false fitting or con-
necting, overloading of the appliance or use of an unsuitable fuel can cause
damage to the appliance itself or to the connecting pipe and the chimney.
Wishing you a lot of pleasure and pleasantly spent hours while using
your fireplace.
Fireplace Kft
1.
Table ofContents
Advertisem*nt
Table of Contents
Summary of Contents for Fireplace K1266
- Page 1 Use of excellent raw materials assures you will have a long-lasting pleasant experience. But it is important that you contribute to the care of your new FIREPLACE hearth by carefully reading this manual and following the instructions. In spite of the finest quality materials and workmanship, false fitting or con- necting, overloading of the appliance or use of an unsuitable fuel can cause damage to the appliance itself or to the connecting pipe and the chimney.
-
Page 2: Fire Plus System
Fire Plus System The Fire Plus System of your FIREPLACE provides optimal, environmentally friendly burning and - combined with an effective heat exchange system - high efficiency. After loading and lighting the fuel, the first phase of the combustion process starts by proceeding to burn the gases leaving the fuel. -
Page 3: Stove - Cross Section Drawing
Stove - cross section drawing Primary air Secondary air "Cold" air of room Warm air Escaping gases Hot gases Grate Chamotte or vermiculite lining 9./10. Tertiary air Charcoal pan... -
Page 4: Heating Capacity In Kw Categories
Heating capacity The heating capacity according to DIN 18893 standard is in m3, referring to buildings that do not comply with the Heat Insulation Regulation. For buildings complying with the mentioned regulation other values are valid (DIN 18893 -1). Make inquires about further details at a specialized dealer or a responsible chimney sweep. - Page 5 (every 1-2 hours). This will stop later on. Do not put anything on the fireplace before the first heating up and don't touch its surface to prevent damage of lacquering. Use protective gloves for your own protection and for the sake of intactness of lacquering.
- Page 6 Necessary air supply for proper burning has to be ensured. In hermetically insu- lated rooms a separate air inlet pipe is needed to guarantee a sufficient supply of air for the operation of the fireplace. It is also necessary in the case of rooms with forced aeration system (e.g. an extractor fan) If it is possible, a solution must be found for turning off these appliances.
- Page 7 (from the charcoal pan), 30 cm beyond the side (from the inner wall of the combustion chamber) of the fireplace. The floor protector can be made of metal or glass which can be chosen from the product list of FIRE- PLACE accessories.
- Page 8 Preparing the appliance for connection: Let's choose the way of connection (top or rear). Diameter of flue outlet is 150 mm. Appliances are sold equipped with a top outlet. We recommend this connection mode because of combustion technological reasons. In case you would like to connect the stove at the back (technical data sheet contains the connection height), remove the flue outlet from the top and the closing lid from the back.
- Page 9 For fixing the ceramic or soapstone tiles of FIREPLACE stoves with ceramic or soapstone cover, please read the appropriate section of the users' manual. (Instructions for fixing the elements of stoves with ceramic or soapstone tiles.) Installation of the connecting pipe: connect the pipe to the flue outlet of the FIREPLACE appliance.
-
Page 10: Suitable Fuels
Watch the heating value of the fuel you use. You can get the exact data at a fuel supplier. Load the fireplace with fuel according to heat demand. The heat- ing value of 1 kg of dry wood is 4 - 4,5 kW/h. So you can place about 2,5 kg of wood into a stove of 8 kW capacity every hour. -
Page 11: Reducing Emission
12. Reducing emissions You can only avoid unwanted emissions by the use of the specified fuels. Put only the amount of fuel in the fireplace that is appropriate for necessary heat transmission. Burning more fuel is unnecessary and leads to unwanted emis- sions. - Page 12 On the other hand, too little air results in imperfect burn- ing and high emission. The fireplace is painted with a high quality heat resistant lacquer that gains its final stability during the first heating. The smell during the first heating derives from the evaporation of the protecting lacquer in the paint.
-
Page 13: Further Use
14. Further use: If you have already used the stove, remove the ash from the combustion cham- ber before lighting another fire. Always empty the ash drawer before each use, while the unit and the ashes are cold, because a full ash drawer can obstruct air supply damage the grate After emptying the ash drawer, replace it immediately. - Page 14 Pour the ash into a waste receptacle only after you make sure that it has completely cooled down. The condition of proper operation of the fireplace is the appropriate chimney draught (feed pressure). This is considerably dependent on the temperature of the outer environment.
-
Page 15: Troubleshooting
15. Trouble Shooting The condition of proper operation of the fireplace is the appropriate chimney draught (feed pressure). This is considerably dependent on the temperature of the outer environment. In case of higher outer temperature (above 15oC) feed pressure can considerably fall and it can disturb proper operation. -
Page 16: Special Notes
Never use spirits, petrol or any other flammable and explosive substance for lighting the fire. Don't place combustible objects inside the radiation area of the fireplace, within 100 cm from the door of the combustion chamber. Follow the instructions in the section entitled "Minimum safety distances". - Page 17 19. General terms of warranty 1. Fireplace Kft as warrantor guarantees the following: A) 2 year guarantee for the stove body, its material, workmanship and operation according to DIN 18891 standard (when used properly). This guarantee is only valid if the unit is used as directed in the Assembling and Handling Guide and the capacity written on the type board.
- Page 18 11. Warrantor grants the warranty as the manufacturer of the product. Terms of the warranty of Fireplace Ltd. do not replace or restrict any other legal warranty or responsibility claims, not even the ones against the dealer from whom the product was bought.
-
Page 19: Table Of Contents
- Lighting the fire for the first time 13. - Further Use - Installation of air regulators - Heating 15. - Troubleshooting 16. - Special notes - Cleaning 17. - Fireplace product quality - General terms of warranty i p q...
